Rally #48-1-2280
Baxter / Hillrom / Welch Allyn #BUR280-81X
ELI 280 Resting Electrocardiograph (1/EA)
BUR280c 12-Lead Multi-Channel Electrocardiograph - Resistive color touchscreen 10.1 in. display, AC or battery operation, with AM12 Wired Acquisition Module; current software, Adult and Pediatric Interpretation, Standard storage (up to 200 ECGs), LAN + WLAN + USBD; US/Canada power cord, AHA 10 wire, 12-lead lead set with banana plugs, ECG clip adapters (set of 10) and CardioSens Ultra II resting tab electrodes (pouch of 100), starter pack 8.5 in. x 11 in. letter paper.
Features
- 10.1", high-resolution, color touchscreen presents all 12 leads of data simultaneously
- Best 10 feature captures the cleanest 10 seconds of ECG data from memory, which can help reduce the need for repeat ECGs
- VERITAS algorithm uses gender-specific, adult and pediatric criteria for interpretations
- Widescreen ECG display helps improve navigation, data entry and electrode connection verification
- Optional wireless data acquisition increases workspace flexibility so you can move freely around the room
- Supports pacemaker spike detection with 40,000 sps/channel data capture
- Includes hook-up confirmation by detection and display of lead reversals
- 1k sps/channel capture for signal assessment during analysis, display and printing
This device is primarily intended for use in hospitals but may be used in medical clinics and offices of any size.
CAUTION: Federal law restricts this device to sale by or on the order of a physician.
For the State of California:
Warning: This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
×
| Rally # | 48-1-2280 |
| Manufacturer # | BUR280-81X |
| GTIN | 00812345024890 |
| Brand | Burdick ELI 280 |
| Manufacturer | Baxter / Hillrom / Welch Allyn |
| Country of Origin | Unknown |
| Warranty | Twenty Seven Month Warranty |
| Instrument Type | Multi-lead electrocardiograph |
| Input Channels | Simultaneous acquisition of all 12 leads |
| Standard Leads Acquired | I, II, III, aVR, aVL, aVF, V1, V2, V3, V4, V5, V6 |
| Waveform Display | Backlit, 10.1” high-resolution color LCD |
| Input Impedance Input Dynamic Range Electrode Offset Tolerance Common Mode Rejection | Meets or exceeds the requirements of ANSI/AAMI/IEC 60601-2-25 |
| Patient Leakage Current Chassis Leakage Current | Meets or exceeds the requirements of ANSI/AAMI ES1 |
| Digital Sampling Rate | 40,000 samples/second/channel used for pacemaker spike detection 1,000 samples/second/channel used for recording and analysis 500 samples/second/channel used for storing rhythm recordings |
| Paper | Perforated Z-fold thermal paper, Smart, A4 or 8.5 x 11” wide, 250 sheets |
| Thermal Printer | Computer-controlled dot array; 1 dot/ms horizontal, 8 dots/mm vertical |
| Thermal Printer Speeds | 5, 10, 25, or 50 mm/s |
| Gain Settings | 5, 10, or 20 mm/mV |
| Report Print Formats | Standard or Cabrera: 3+1, 3+3, 6, 6+6, or 12 channel |
| Rhythm Print Formats | 3, 6, 8 or 12 channel with configurable lead groups |
| Keyboard | Touchscreen keyboard with alphanumeric keys, soft-key menu and dedicated function keys |
| Frequency Response | 0.05 to 300 Hz |
| Filters | High-performance baseline filter; AC interference filter 50/60 Hz; low-pass filters 40 Hz, 150 Hz, or 300 Hz |
| A/D Conversion | 20 bits (1.17 microvolt LSB) |
| Device Classification | Class I, Type CF defibrillation-proof applied parts |
| ECG Storage | Up to 200 ECGs Internal storage up to 5 Digital Rhythm Recordings |
| Information Exchange | Requires ELI Link software version 4.2.0 or greater OR Cardio Server 7.1 or greater with ELI device connectivity. NOTE: Requires ELI Link software version 5.2.0 or greater for transmission of Rhythm Recordings |
| Advanced Security | Requires software version 2.0.0 or greater Requires ELI Link software version 4.4.0 or greater OR Cardio Server 7.1 or greater with ELI device connectivity |
| Weight | 12.5 lbs. (5.68 kg) including battery (without paper) |
| Dimensions | 17.5 x 15.5 x 4.5” (44.45 x 39.37 x 11.43 cm) |
| Power Requirements | Universal AC power supply (100-240 VAC at 50/60 Hz); Internal, rechargeable sealed lead-acid battery Battery charge times from minimum level, 10.6V to: 85% in 4 hours; 90% in 7 hours; and 100% in 7+ hours |
| Instrument Type | 12-lead ECG acquisition module |
| Input Channels | 12-lead signal acquisition |
| ECG Leads Output | I, II, III, aVR, aVL, aVF, V1, V2, V3, V4, V5, and V6 |
| Trunk Cable Length | Approximately 10 feet (3 meters) |
| AM12 Lead Set | RA, LA, RL, LL, V1, V2, V3, V4, V5, and V6 (R, L, N, F, C1, C2, C3, C4, C5, and C6) with detachable lead wires |
| AM12M Connector | DB15 type connector for ECG patient cable connection |
| Sampling Rate | 40,000 samples/second/channel acquisition; 1,000 samples/second/channel transmitted for analysis |
| Resolution | 1.17µV reduced to 2.5µV for analysis |
| User Interface | 12-lead ECG and rhythm strip buttons at the acquisition module |
| Defibrillator Protection | Complies with AAMI standards and IEC 60601-2-25 |
| Device Classification | Type CF, Defibrillator Proof |
| Weight | 12 oz. (340 g) |
| Dimensions | 4.72 x 4.3 x .98” (12 x 11 x 2.5 cm) |
| Power | Powered by USB connection to the ELI 280 |
| Instrument Type | 12-lead wireless acquisition module for resting ECG |
| Input Channels | 12-lead signal acquisition and transmission |
| ECG Leads Transmitted | I, II, III, aVR, aVL, aVF, V1, V2, V3, V4, V5 and V6 |
| Module Transmission Protocol | Bidirectional and frequency hopping; beacon and response method links a single acquisition module to a single electrocardiograph or cardiac stress system |
| Frequency Range | 2400.96 MHz to 2482.56 MHz |
| Module and Receiver Distance | Approximately 10 feet (3 meters) |
| Lead Set | RA, LA, RL, LL, V1, V2, V3, V4, V5 and V6 (R, L, N, F, C1, C2, C3, C4, C5 and C6) with detachable lead wires |
| Sampling Rate | 40,000 samples/second/channel acquisition; 1,000 samples/second/channel transmitted for analysis |
| Resolution | 1.875 microvolt LSB |
| User Interface | Three-button operation: ON/OFF, 12-lead ECG acquisition and rhythm strip acquisition |
| Defibrillator Protection | LED indication of power status, operating mode, lead fault and remaining battery charge |
| Device Classification | Type CF, battery operated |
| Weight | 6.7 oz. (190 g) with battery |
| Dimensions | 4.45 x 4.25 x 1.1” (11.3 x 10.8 x 2.79 cm) |
| Battery | 1 AA alkaline battery typically powers WAM module for acquisition of 250 resting ECGs |
| Operating Temperature | +10° to +40°C (+50° to +104°F) |
| Operating Humidity | 10% to 95% RH, non-condensing |
| Storage Temperature | -40° to +70°C (-40° to +158°F) |
| Storage Humidity | 10% to 95% RH, non-condensing |
| Atmospheric Pressure | 500 hPa to 1060 hPa |
×
Accessories and Parts
Accessories and Parts
| 010-1643-00 | 7 lead replacement cable for Vision 5L recorder |
| 108070 | Monitoring Snap Electrode (300/Case) |
| 108071 | Resting Tab Electrode (5000/Case) |
| 30012-019-54 | WAM Wireless Acquisition Module without Lead Wires |
| 715006 | ECG Multifunction Electrode Adapter Clips, Set of 10. |
| 9293-046-07 | Combiner WAM, AM12, 10 Leads |
| 9293-046-60 | 10 wire AHA lead set with banana plugs for the WAM or AM12, gray |
| 9293-046-62 | Replacement lead set, AHA, limb leads with banana plugs for the WAM or AM12, gray |
| 9293-046-64 | Replacement lead set, AHA, V1-V3 with banana plugs for the WAM or AM12, gray |
| 9293-046-66 | Replacement lead set, AHA, V4-V6 with banana plugs for the WAM or AM12, gray |
| 9293-046-67 | Replacement lead set, IEC, C4-C6 with banana plugs for the WAM or AM12, gray |
| 9293-047-60 | 10 wire AHA lead set with clips, for use with WAM or AM12, gray |
| 9293-047-62 | Replacement lead set, AHA, limb leads with clips, for use with WAM or AM12, gray |
| 9293-047-64 | Replacement lead set, AHA, V1-V3 with clips, for use with WAM or AM12, gray |
| 9293-047-66 | Replacement lead set, AHA, V4-V6 with clips, for use with WAM or AM12, gray |
| 9293-048-54 | AM12 acquistion module without lead wires |
| 9300-033-51 | Electrode Resting Tab (500/Box) |
| 8363-039-50 | Pole, Rail AM12M Holster Mount |
| 8363-039-51 | Fluted Post for AM12M Holster Mount |
| 010-1644-00 | Cloth Pouch with Strap for Vision 5L Recorder |
| 010-1645-00 | Plastic Clip and Belt for Vision 5L Recorder |
| 6400-012 | Cable, USB, Type A-To-B, Full SPD |
| 8485-026-50 | Pouch and Belt Assembly for use with WAM/AM12 |
| 9100-026-50 | Thermal Paper, Zfold, cued with header (3000/Case) |
| 3181-008 | Power Cord for External Power Supply |
| 4800-013 | Battery, Rechargeable SLA, 12V, 7Ah |
| 25018-034-50 | Cable Assembly, Printhead to PCB, ELI 200+ |
| 25018-036-50 | Cable Assembly, Keyboard to Motherboard, ELI 200+ |
| 25018-041-50 | Cable Assembly, Printhead to PCB, ELI 350 |
| 25018-042-60 | Cable Assembly, LCD to Motherboard, ELI 350, 380 |
| 25018-042-70 | Cable Assembly, LCD to Motherboard, ELI 380 |
| 25018-048-50 | Cable Assembly, Picoflex Ribbon Cable, 12 CCT, 17.7 inches |
| 25019-005-50 | Cable Assembly, M12 8 Conductor |
| 25020-058-50 | Printhead Ground Wire, ELI 200 |
| 26025-045-151 | Cue Sensor PCB Assembly, ELI 200+ |
| 26025-077-170 | PCB Assembly, B&B-N WLAN Module |
| 26025-092-151 | Transceiver Key Assembly, USB, (UTK) |
| 26025-092-404 | UTK MODULE V2 ASSY - 2 |
| 26025-114-150 | PCB Assembly, Touch Screen Controller, ELI 280 |
| 3171-010 | Coax Cable, U.FL to RP-SMA Bulkhead, 100 mm |
| 3171-011 | Coax Cable, U.FL to RP-SMA Bulkhead, 150 mm |
| 3225-003 | Phone Connector Module, 4 Pin, RA LO Pro |
| 3225-008 | Connector, RJ-45, 8 Pin Shielded, with Green LEDS |
| 3600-016 | Antenna, Dual Band, 2400, 5000MHz, RP-SMA |
| 3601-001 | Coupler, TNC Female to BNC Female |
| 4027-001 | Fuse, Polyswitch, TR 600 Volt, 150 Miliamp |
| 41000-028-54 | Printhead Assembly, Black, ELI 280,350,380 |
| 6001-002-01 | Screw, Shoulder, Hex M3 X 0.5, Stainless |
| 6020-060 | Screw, Thd-Form, Pan Head, Torx, 4-20x0.25in. |
| 6020-061 | Screw, Thd-Form, Pan Head, Torx, 4-20x0.5in. |
| 6020-062 | Screw, Thd-Form, Pan Head, Torx, 4-20x0.375in. |
| 6020-064 | Screw, Pan Head, Phillips, M4x0.7x12mm Stainless, ZN coated |
| 6020-735-02 | Screw, Flat Head, Torx, M3 X 6, Coated |
| 6020-835 | Screw, Pan Head, Torx, M3 X 8 |
| 6020-835-02 | Screw, Pan Head, Torx, M3 X 8 Coated |
| 6030-025 | Set Screw, Socket, M2.5 X 4mm, Steel, Cup Point |
| 6141-003 | O-Ring, Buna-N, 1, 2 OD X 5, 16 ID |
| 6320-003 | Foot, 0.64 OD X 0.125 Adhesive, Black |
| 6545-008-01 | Motor, Stepper, PM, 35mm, 24V 40 Ohm, No PTC |
| 7495-001 | Cable Tie, Locking, 3.9 X .10 |
| 8342-004-53 | Gear Box, ELI 200+, IML, IPM |
| 8342-005-51 | Paper Tray, ELI 250c |
| 8342-007-01 | Spacer, A4, Paper, ELI 200+ |
| 8342-007-02 | Spacer, A4, Paper, Black, ELI 200+ |
| 8347-011-51 | Cover, SMA, Round, Black |
| 8361-002-50 | Housing, Lower, ELI 280 |
| 8361-004-50 | Battery Door, ELI 280 |
| 8361-005-50 | Cable Assembly, LCD To Motherboard, ELI 280 |
| 8361-006-50 | Pad Battery 2.5 in. X 2.5 in., ELI 280 |
| 8361-007-50 | Pad Battery 1.35 in. X 6 in., ELI 280 |
| 8361-008-50 | Sealing Surround Service Kit, ELI 280 |
| 9042-077-01 | Label, Power, ELI 280 |
| 9042-078-01 | Label, User Instructions, ELI280, 380 |
| 9042-078-02 | Label, User Instructions, Burdick 280 |
| 9042-081-01 | Label, Caution, Lithium Ion Battery |
| 9050-059-10 | Label, Reg, WLAN, B&B Electronics |
| 9205-080-50 | Shipping Carton Set, ELI 280 |
| 9910-017 | Modem Multitech, V.92 5V, Serial |
| 9911-016-01 | Cart Base With 4 Swivel Castors, ELI 150c, ELI 250c |
| 9911-016-03 | Cart Column With Hardware, ELI X50c, ELI 3xx |
| 9911-016-08 | Quickels Pump Holder With Hardware, ELI X50c, ELI 3xx Cart |
| 9911-016-10 | Hardware Kit, ELI X50c, ELI 3xx |
| 9911-016-14 | Cart Arm, ELI 150C, 250C, 350 |
| 9911-016-21 | WAM holster replacement kit for transport cart |
| 9911-016-24 | Mounting hardware kit for ELI electrocardiographs to transport cart |
| 9911-016-25 | Holster Assembly With Strips, WAM, ELI Cart |
| 9911-016-26 | Handle End Cap Replacement, ELI Cart |
| 9911-016-27 | Scanner Cup Replacement, ELI Cart |
| 9911-016-28 | Mouse Cup Replacement, ELI Cart |
| 9911-016-29 | Cart Replacement Handle, X50C, 280, 3xx |
| 9911-016-52 | Cord clamp kit for transport cart, for use with ELI 150C, 250C, 350, 280, 380 |
| 9911-017-02 | Cart Top Plate Assembly, With Hardware, ELI 3xx |
| 9911-018-01 | Cart Top Plate Assembly With Hardware, ELI 280 |
| 9911-018-02 | Mouse Tray with hardware for ELI 280, BUR 280, ELI350, and ELI 380 carts |
| SERV 26025-113-151 | PCB Assembly Without Comm, Tested, ELI 280 |
| SERV 26025-113-153 | PCB Assembly, LAN+WLAN, Tested, ELI 280 |
| SERV-ASSY-181-02 | 8 in. Writer Lid Assembly - ELI 280, 380 No Label |
×
Documentation Links
Brochure
Documentation Links
Brochure
- ELI 280 Resting ECG Brochure
- Improving Chronic Care Management
- Wireless Acquisition Module Die-Cut Card
- Cardiopulmonary Line Overview
- ELI 280 12-Lead Resting ECG Specification Sheet
- Universal ECG Cart for Outpatient Care Specification Sheet
- Universal ECG Cart for Acute Care Specification Sheet
- ELI 280 Resting ECG SmartCare Service Program
- WAM Wireless Acquisition Module 12-Lead ECG Acquisition Module With Wireless Technology, Specification Sheet
- ELI 280 Technical Requirements Specification Sheet
×
ELI 280 Resting ECG Training Videos
ELI 280 Resting ECG Training Videos
×
Services
Services
| Program | Part Number | Program Terms |
| Protection | S1-ELI280-PRO-PS | 3 Years |
| Protection+ | S9-ELI280-PROPL-PS | 3 Years |
