Rally #45-1-2860
Baxter/Hillrom/Welch Allyn #28600
Diagnostic Instruments (1/EA)
Welch Allyn TM286 AutoTymp Pure Tone and Tympanometry Screener with Tympanometry Mode, Reflex Mode, and Audiometry Mode; Audiometry Headset (External), Threshold Audiometry Card, Thermal Printer Paper (3 rolls), Ear-Tip Set (#26100); 100-240 V, 50-60 Hz AC, IEC Plug Type-B.
Features
- Fast Detection Of Middle Ear Pathologies
- 226 Hz Tympanograms Offer Summary Information
- Manual And Automated Audiometry
- Lightweight And Portable
- Internal Printer
- Acoustic Reflex Measurements Available In 500, 1000, 2000, 4000 Hz Frequencies
The TM286 Auto Tymp is available with both 226Hz and 1Khz probe tones to accommodate testing for patients between the ages of birth through geriatric. The instrument is to be used by trained personnel only, such as audiologists, ENT surgeons, physicians, hearing healthcare professionals or personnel with a similar level of education. This device should not be used without necessary knowledge and training to understand its use and how results should be interpreted.
An optional soft-sided carrying case is available for portability. Also, a patient handswitch, patch cords, and earphone sound enclosures may be purchased as optional accessories.
For the State of California:
Warning: This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Rally # | 45-1-2860 |
Manufacturer # | 28600 |
GTIN | 00732094082036 |
Brand | TM 286® Autotymp® |
Manufacturer | Baxter / Hillrom / Welch Allyn |
Country of Origin | Unknown |
Application | Tympanometer |
UNSPSC Code | 42182416 |
Dimensions | 12.5" W x 14.5" D x 4.7" H (31.8 cm W x 36.8 cm D x 11.9 cm H) |
Weight | 5 lbs (2.3 kg) - unit and probe |
Operating Temperature | 59° F to 104° F (15° C to 40° C) |
Warm-up Time | 10 minutes for instruments stored at room temperature |
Storage/Shipping | -30° F to 149° F (-34° C to 65° C) |
Ambient Pressure | 98 kPa to 104 kPa |
Humidity | 15% to 95% |
Warranty | One Year Warranty |
Probe Tone | 226 Hz, ±2% |
Sound Pressure Level | 226 Hz: 85.5 dB SPL, ±2.0 dB, measured in a 2.0 cm3 coupler |
Harmonic Distortion | < 3% |
Admittance (Compliance) | Range: 226 Hz: 0.0 to 1.5 cm3 or 0.0 to 3.0 cm3 |
Note:
- The range is automatically selected based upon the amplitude of the compensated tympanogram.
- The maximum uncompensated (ECV + tympanogram peak) admittance (compliance) range is 0 to 5.0 cm3.
- ECV/cavity limits for initiating pressurization is 0.2 to 5.0 cm3. Compliance Accuracy: ±0.1 cm 3 or ±5%, whichever is greater.
Pressure Range | +200 to -400 daPa |
Pressure Accuracy | ±10 daPa or ±15%, whichever is greater |
Rate of Sweep | 600 daPa/sec except near tympanogram peak where sweep rate slows to 200 daPa/sec to provide better definition of peak compliance. |
Direction of Sweep | Positive to negative |
Tympanogram Test Time | Approximately 1 second |
Gradient | Measurement of the tympanogram width taken at 50% of peak compliance. |
Note:
- 1 daPa = 1.02 mm H20
- The pressure sweeps to at least -100 daPa. To save test time, pressure sweep stops when tympanogram returns to baseline after -100 daPa.
- Full pressure sweep for 5 cm3 from sea level to 7000 ft. altitude with no leak.
- High compliance tympanograms (test time) will take somewhat longer.
Frequencies | 500, 1000, 2000, and 4000 Hz for ipsilateral stimulation |
Accuracy | ±3% |
Total Harmonic Distortion | < 5% for outputs less than 110 dB HL and <10% at 110 dB HL |
Rise/Fall Time | 5 to 10 msec |
Transducers | |
Ipsilateral | Probe Assembly |
Output Levels | |
Ipsilateral | 500 and 4000 Hz: 80, 90,100 dB HL 1000 and 2000 Hz: 85, 95, 105 dB HL |
Pressure | Reflex measures are set automatically to pressure at peak compliance with an offset of -20 daPa if peak pressure is negative and +20 daPa if peak pressure is positive. |
Reflex Determination | Compliance change of 0.05 cm3 or greater |
Reflex Test Time | 1 to 12 seconds depending upon the number of ipsilateral test frequencies selected (4 maximum) and intensity required. |
Note:
- Ipsilateral stimuli are time multiplexed with probe tone (93 ms ON, 66 ms OFF).
- Stimuli are presented at lowest level first. If there is no response, the intensity is increased by 10 dB until a response is detected or the maximum dB HL is reached.
Probe: | |
Steady Yellow | Occlusion |
Blinking Green | Ready To Start |
Steady Green | Test In Progress |
Steady Orange | Leak In Pressure |
No Light | Test Is Finished |
Frequencies | 125, 250, 500, 750, 1000, 1500, 2000, 3000, 4000, 6000, 8000 Hz |
Accuracy | ±2% |
Total Harmonic Distortion | < 2.5% (125 to 3000 Hz measured acoustically at maximum dB HL; 4000 and 6000 Hz measured electrically) |
Audiometric Headset | Pair External Headset earphones Type 51 cushions (10 ohms impedance) Headband force per ANSI S3.6 and IEC 645 (4.5 ±0.5) |
Insert Earphones | Ear Tone Insert earphones (50 ohm impedance) |
External Headset Earphones | |
Frequency | Intensity |
125 Hz | -10 to 50 dB HL |
500 to 4000 Hz | -10 to 90 dB HL |
6000 Hz | -10 to 85 dB HL |
250 and 8000 Hz | -10 to 70 dB HL |
Accuracy | 125 to 4000 Hz ±3 dB 6000 and 8000 Hz ±5 dB |
Step Size | 5 dB |
Signal-to-Noise Ratio | > 70 dB in 1/3 octave; less than -10 dB HL for levels less than 60 dB HL |
Rise/Fall Time | 20 to 50 msec |
Note: An additional +10 dB is available per frequency via the +10 dB button.
Tone is normally off until the Present bar is depressed | |
Continuous | Tone is steady when present bar is depressed |
Pulsed | Tone is pulsed at 2.5/sec (i.e., 200 msec ON, 200 msec OFF) |
FM (frequency modulated) | Tone is frequency modulated at a rate of 5 Hz, ±5% |
Paper Roll Length | Approximately 80 feet (960") |
Tests/Roll | Approximately 230 tests or 115 people |
Assumption | 2 Tympanograms/Reflex + 1 Audiogram per person |
Speed | Approximately 1 minute to print three screens: Tympanogram Tympanogram + reflex (4) Audiogram |
External Printer | Optional Deskjet color printer recognizing PCL3 or PCL3 GUI; 8-1/2" x 11" or A4 format |
Line Voltage | 100 - 240 VAC (±10%) |
Frequency Range | 47 - 63 Hz |
Power Consumption | 16 watts maximum while printing. Low voltage input for desktop |
Power Supplies | 7 VDC, 5.0 A |
Display | 240 x 64 Graphical, Monochrome LCD |
28600 | TM 286 AutoTymp |
05260-U | TM Carrying Case |
23220 | Audiometry Patient Response Switch |
23221 | Audiometry Single Patch Cord, 2-Conductor |
23222 | Audiometry AudioCups |
26008 | TM Eartips 8 mm (box of 25) |
26011 | TM Eartips 11 mm (box of 25) |
26013 | TM Eartips 13 mm (box of 25) |
26015 | TM Eartips 15 mm (box of 25) |
26016 | TM Eartips 16 mm (box of 25) |
26017 | TM Eartips 17 mm (box of 25) |
26018 | TM Eartips 18 mm (box of 25) |
26019 | TM Eartips 19 mm (box of 25) |
26020 | TM Eartips 20 mm (box of 25) |
26100 | TM Eartips (6 sizes, 2 each, 8, 11, 13, 15, 17, 19 mm) |
26240 | TM Dust Cover |
26241 | TM Test Cavity |
28203 | DD45 Audiometry Headset External |
28206 | Threshold Audiometry Card |
28209 | External Audiometry Headset (Required Calibration) |
28210 | Welch Allyn Y-Cord Headset (Two-Plug Shielded) |
28601 | TM286 Power Brick (for devices with serial numbers GS0077116 and earlier) |
28602 | TM286 Cord, Power, Hosp Grade |
28603 | TM286 Instructions for Use Manual (printed, English only) |
28604 | TM286 Quick Reference Guide |
28607 | TM Wall Chart for Tymp tracings |
52600 | TM Printer Paper, 4” Thermal, 5 rolls |
729243 | Power Supply AM282, TM 286, 4th Edition (for devices with serial numbers GS0077117 and later) |