Rally #45-1-3125
Baxter/Hillrom/Welch Allyn #28200
Welch Allyn AM 282 Manual Audiometer (1/EA)
Welch Allyn AM282 Manual Audiometer with 11 Frequencies (125 Hz to 8,000 Hz), Audiometry Headset included, Threshold Audiometry Card, Audiogram Forms (Qty. 50), Soft Storage Case; 100-240 V, 50-60 Hz AC, IEC Plug Type-B.
Features
- 11 frequencies: 125 Hz to 8000 Hz
- Wide intensity range
- Compact, lightweight design
- AC line power and battery
- Calibration storage for standard earphones and optional insert headphones
- Ideal for physician's office for screening audiometry
The audiometer is a single-channel, pure tone, air conduction, portable instrument designed to provide basic audiometric screening capability for physicians' offices and industry. The lightweight design allows easy transport to a variety of testing locations. The clearly labeled front panel controls and full frequency range make accurate, reliable testing a simple matter for any user.
Note: Rx Only
For the State of California:
Warning: This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
×
*The above intensity ranges apply to the external headset earphones.
Note:
Note: The instrument does not provide a recharging circuit for these batteries.
Note: Warm-up time is required if storage temperature is different from room temperature.
| Rally # | 45-1-3125 |
| Manufacturer # | 28200 |
| GTIN | 00732094082319 |
| Brand | AM 282 |
| Manufacturer | Baxter / Hillrom / Welch Allyn |
| Country of Origin | Unknown |
| Application | Compact Audiometer |
| Type | Manual |
| UNSPSC Code | 42182401 |
| Dimensions | 12.59” W x 8.76” D x 3.18” H (32 cm W x 22.3 cm D x 8.1 cm H) |
| Weight | 2.55 lbs (1.16 kg) with 5 AA batteries |
| Warranty | One Year Warranty |
| Discrete Frequencies | 125, 250, 500, 750, 1000, 1500, 2000, 3000, 4000, 6000, 8000 Hz |
| Accuracy | ± 2% |
| Total Harmonic Distortion | < 2.5% measured acoustically at the maximum Hz for frequencies below 5000 Hz and measured electrically above 5000 Hz |
| 125 Hz | -10 to 50 dB HL |
| 500 to 4000 Hz | -10 to 90 dB HL |
| 6000 Hz | -10 to 85 dB HL |
| 250 and 8000 Hz | -10 to 70 dB HL |
| Accuracy | 125 to 4000 Hz : ± 3 dB 6000 to 8000 Hz : ± 5 dB |
| Signal to Noise Ratio | > 70 dB |
| Rise/Fall Time | 20-50 msec |
*The above intensity ranges apply to the external headset earphones.
Note:
- The maximum output values are reduced by 10 dB when insert phones are used, except for 6 kHz, where the maximum dB HL is reduced by 20 dB.
- A “+10” dB button extends the maximum at all frequencies by 10 dB.
| Continuous | Steady when present bar depressed |
| Pulsed | 2.5 pulse/sec |
| FM | ±5%, 5 Hz, triangular modulation |
| Line Voltage | The AC-DC adapter is universal autoranging with an input voltage range of 90 - 264 V at 47 - 63 Hz |
| Consumption | 1.5 watts |
| Battery Types | 5 each alkaline AA 1.5 V, 5 each rechargeable Nicad or NIMH AA 1.2 V |
| Capacity | Minimum of 10 hours of power for either battery type. A Low Battery icon will display when there is approximately one hour of power remaining. |
Note: The instrument does not provide a recharging circuit for these batteries.
| Operating Temperature | 59 °F to 104 °F (15 °C to 40 °C) |
| Ambient Pressure | 98 kPa to 104 kPa |
| Warm-up Time | 10 minutes for instruments stored at room temperature |
| Storage/Shipping | -30 °F to 149 °F (-34 °C to 65 °C) |
| Battery Storage | -4 °F to 105 °F (-20 °C to 40 °C) |
| Humidity | 15% to 95% |
Note: Warm-up time is required if storage temperature is different from room temperature.
×
Configurations
Configurations
| 28200 | AM282 Manual Audiometer with Case |
×
Parts and Accessories
Parts and Accessories
| 28200 | AM282 Manual Audiometer with Case |
| 28202 | AM282 Soft Carry Case |
| 28204 | AM282 Instructions for Use Manual (printed, English only) |
| 28206 | Threshold Audiometry Card |
| 28208 | AM282 Audiogram Forms (1 pad of 50) |
| 28209 | AM 282 External Audiometry Headset |
| 28210 | Audiometry Y-Cord Headset 2 Plug Shielded |
| 23220 | Audiometry Patient Response Switch |
| 23221 | Audiometry Single Patch Cord, 2-Conductor |
| 729243 | Power supply AM 282, TM286, 4th Edition |
